owner: Mike Hedtke city: Prescott Valley, AZ make: Chevrolet model: Belair Sedan year: 1957 Engine: - 5.7 Liter 350 hp Chevy Small Block - Cast iron block with four-bolt main bearings, 4.00 “ cylinder bore - Forged steel Crank with one-piece rear main seal, 3.48” stroke - Heat-treated and shotpeened forged steel rods with pressed pins - 9.8:1 compression aluminum pistons - High-performance hydraulic roller cam with 235 degrees duration and .480” maximum lift - Corvette aluminum heads with 1.94” intake valves, 1.50” exhaust valves, raised D-shaped exhaust ports, 58cc combustion chambers, angled spark plugs, screw in rocker arm studs, pushrod guideplates, and raised rocker cover rails. - Edelbrock roller rockers - Chrome silicone wire valve springs with damper - Aluminum high-rise dual plane intake manifold - Cerillo magneto - Five quart Z28 oil pan with baffle - Edelbrock 780cc four barrel carburetor Transmission: - Chevy 400 turbo-hydro with shift kit and 2800 rpm stall converter Rear end: - Ford 9” positraction with 4:88 gears. - Summers Brothers axles - Coil over shocks with ladder bars - BF Goodrich P295/50HR15 TA radial tires - 3” tub to accommodate rear wheels and tires - 15” Weld aluminum star wheels (10” wide) Front end: - Chevy 605 power steering box - BF Goodrich P215/60HR15 TA radial tires - 15” Weld aluminum star wheels - 3” dropped spindles Interior: - Stock front and back seats - Upholstery is gray tweed with custom door pulls added - Steering wheel is 70’s Camaro Paint: - Acrylic enamel Ferrari red